By continuing to use this site you agree to the use of cookies. Further details: privacy policy

 

Wide belt sander WEBER KS 5-O-1350

Kalibrieren, Furnier- Feinschliff /calibrating, veneer, fine sanding

Article number: 71268

Technical specifications

Year of manufacture2000
Sanding width mm1350
Sanding aggregates total5
Cross-belts1
Sanding rollers2
Steel roller
Combination unit1
Segmental pressure padelectronic
Vacuum table
Constant passline height
Sanding belt length mm2620

Further technical details

Machine controlSIEMENS SIMATIC OP 37
WEBER Segmented pressure beam
WEBER ISA
Reversion of rotation
FLEX TRIM flexTrim
WANDRES TKRE 28 Tornado-Channel
Workpiece thickness min mm2.5
Passage height max mm120
Sanding pads total2
Segment width mm16
Sanding brush unitDrum sanding brushes
Cleaning brushSword brush
Main motor power kW30
Belt speed max m/s25
Adjustable sanding belt speedcontinuously variable
Feedrate max m/min14
Continuously variable feed
Blow-off deviceSanding belt + workpiece
Jump-in control
Aggregates with frequency inverters2
Configuration of aggregatesr-s-c-p-u-u-bu
Side of belt changeLeft
CE marking
Total connection kW112
Weight kg8275
AvailabilityWarehouse D-01665 Klipphausen
Operating statusdismantled/ stored

Description

* detaillierte Aggregatekonfiguration:
1. Kontaktwalzenaggregat mit genuteter Stahlwalze D = 200 mm zum
Kalibrieren
2. Querschleifaggregat, Schleifschuhsegmente 16 mm breit
3. kombiniertes Schleifwalzen-Schleifschuh-Aggregat mit genuteter
Stahlwalze D = 130 mm und Segmentschleifshuh mit 16 mm breiten
Segmenten
4. Schleifschuhaggregat mit 16 mm breiten Segmenten und
Drehrichtungsumkehr
5. Schleifbürste mit Flex-Trimm-Schleifeinsätzen, Drehrichtungsumkehr
und frequenzgeregelter Umdrehungsgeschwindigkeit, 12° Schrägstellung,
elektromotorische Verstellung
6. Schleifbürste mit Flex-Trimm-Schleifeinsätzen, Drehrichtungsumkehr
und frequenzgeregelter Umdrehungsgeschwindigkeit, 12° Schrägstellung,
elektromotorische Verstellung
7. WANDRES Schwertbürste oben (ohne Benetzung)
8. rotierend Werkstückabblasdüsen oben
9. WANDRES Schwertbürste unten (ohne Benetzung)

=== English ===
* detailed description of working units
1st contact sanding roller with grooved steel roller D = 200 mm for
calibrating
2nd transvers sanding unit, sanding pad segments' width 16 mm
3rd combined contact roller sanding pad unit with grooved steel roller
D = 130 mm and segmented sanding pad with 16 mm width segments
4th sanding pad unit with 16 mm width segments and rotation reversion
5th sanding brush with Flex-Trimm inserts, rotation reversion,
frequency controlled turning speed, 12° swivelled and motor powered
adjustment
6th sanding brush with Flex-Trimm inserts, rotation reversion,
frequency controlled turning speed, 12° swivelled and motor powered
adjustment
7th WANDRES top sword brush (without moistening)
8th top rotating workpiece cleaning nozzles
9th WANDRES bottom sword brush (without moistening)