By continuing to use this site you agree to the use of cookies. Further details: privacy policy

Article number: 80258

Technical specifications

Year of manufacture2017
Opening width mm600
Sanding stations2
Dust extraction
Lacquer roller coaters2

Further technical details

Passage height max mm95
Workpiece feedrubber belt
Processed sides1
Wiper brushes
CE marking
Declaration of CE-conformity
Weight kg7520
AvailabilityWarehouse D-01665 Klipphausen
Operating statusdismantled/ stored


* Bestandteile:
1. 3 Bürsten zur Reinigung
2. Auftrag mit 2 Rollen.
3. Zwei rotierende Vertreiber
4. 3 Bürsten, davon die ersten zwei 15°-25° schräg stellbar
5. UV-Trocknung
* Aufstellmaße 22.500 x 1.860 mm

Die technischen Daten sind z.T. geschätzt. Tatsächliche Werte können
ggf. abweichen.

=== English ===
1. Three sets of rotary brushes, each speed, height is adjustable.
Ment for cleaning the detail before applying oil/laquer etc.

2. Applicator with two application rollers. Speed and rotation is
adjustable, so is height. Depending on the need, first roller applies
finish, the second takes away the overamount, if neccessary. Both
rollers can apply also, it all depends on the finish.

3. Two sets of rotary finishing pads. Speed, rotation and height
adjustable. Ment to even out the applied finishing material, if
needed. usually if the detail, that is being finished, is not with an
even surface ( eg brushed wood etc )

4. Three sets of brushes to further even out the finish after the
rotary pads. The first two are at an angle, maybe 15-25 degrees to the
linear motion of the detailed item, the last one is perpendicular the
line. Again, height, speed and rotation is adjustable.

5. UV oven. Uses a metal transport chain with chrome finish, cures uv
and led-uv laquer and oils.
* Required space 22.500 x 1.860 mm

Technical data are partly estimated. Actual values may vary.

An extract from the encyclopedia for woodworking technology WOOD TEC PEDIA



Overall solution for the refining of parquet. Equipment: in two editions available: 300 mm and 600 mm for the machining phases application, distribution of bates and drying
Read more

source: SORBINI