Dieser Artikel ist nicht mehr verfügbar.
Maschine zur Bearbeitung von Türzargen MARTINMECHANIC PROFI ZFL300/25
Hersteller | MARTINMECHANIC |
Maschinenart | Maschine zur Bearbeitung von Türzargen |
Baujahr | 2013 |
Artikelnummer | 81094 |
Kapazität Einheiten/8h | 960 |
Werkstückbreite max | 400 mm |
Werkstücklänge max | 2.400 mm |
Werkstückdicke max | 80 mm |
CNC-Stationärmaschinen | 1 |
Zuschnittsäge | Ja |
Für Türzargen | |
Barcodeleser | |
Barcode-Steuerung | |
Schaltschrank-Kühlung | |
Zangengreifer | |
Steuerung | PC-Steuerung, SPS |
* Die Angabe zur Kapazität ist ein theoretischer Wert. Die reale
Kapazität ist von den gewählten Bearbeitungsschritten abhängig.
* Konfiguration:
- 2 x Werkstückvorschub mittels Spannzange
- Sägeaggregat 4,5 kW schwenkbar 90/45° mit eigener CNC-Achse
- Bohraggregat für Verbinderbohrungen in Gehrung 0,4 kW rechts
- Bohraggregat für Verbinderbohrungen in Gehrung 0,4 kW links
- Aggregateträger mit eigener CNC-Achse, 3 Fräsaggregate schwenkbar
vertikal/horizontal, 2,0 kW, 18.000/min
- Aggregateträger mit eigener CNC-Achse, 3 Fräsaggregate schwenkbar
vertikal/horizontal, 2,0 kW, 18.000/min
=== English: ===
* The information about the capacity is a theoretical value. The real
production capacity highly depends on the executed program.
* Configuration:
- 2 x workpiece carriers with grippers
- Saw unit with own CNC-axis, 4,5kW, tiltable 90/45°
- Drilling unit for connection holes in the mitre, 0,4 kW left side
- Drilling unit for connection holes in the mitre, 0,4 kW right side
- Aggregate carrier with own CNC-axis, 3 routers, tiltable from
horizontal to vertical operation, 2,0 kW, 18.000 /min
- Aggregate carrier with own CNC-axis, 3 routers, tiltable from
horizontal to vertical operation, 2,0 kW, 18.000 /min