Dieser Artikel ist nicht mehr verfügbar.
Holzfensterfertigungsanlage CML CENTRO MACCHINE LEGNO
Hersteller | CML CENTRO MACCHINE LEGNO |
Maschinenart | Holzfensterfertigungsanlage |
Baujahr | 2006 |
Artikelnummer | 81811 |
Betriebsbereitschaft | demontiert/ eingelagert |
Anzahl Schlitzspindeln | 2 |
Profilspindeln rechts | 5 |
Profilspindeln links | 5 |
Länge Schlitzspindel | 620 mm |
Länge Profilspindel | 620 mm |
Kantellänge min | 220 mm |
Kantellänge max | 3.500 mm |
Kapazität Einheiten/8h | 220 |
Vorschub max | 24 m/min |
Vorschub Stufenlos | |
Kappsäge | |
Schleifmaschine | Doppelseitig |
Winkelanlage | |
Glasleistensäge | |
Bohren | |
Schlitz/Zapfen doppelseitig | Ja |
Fensterwerkzeugsatz | IV 68 |
Voll verkettet | |
CE-Zeichen |
Pos. A: Beschickungstisch/Feeding table
Pos. B: Doppelprofiliermaschine CML/ Double Roll Forming Machine CML
Pos. E: Bearbeitungszentrum links CML Step-4S/ Automatic Machining
Centre Left
Pos I: Bearbeitungszentrum CML Step-4D/Automatic Machining Centre CML
Step-4D
Pos. M: Spezialfräser/special cutter
Pos. O: Schleifstation (oben/unten) Mod. Profilholz 8 LEV/Sanding
station (under/over)
Pos. Q: Profilier/Fräsmaschine links CML Mod. PMD/Profiler/-milling
machine left
Pos. S: Profilier-/Fräsmaschine rechts cml mod. PMD/ Profiler/-milling
machine right
Pos. T: Schleifstation Mod. Profilholz Mak 6TWORK/Sanding station
profilwood
Pos. U: Entladetisch/unloading table
Die technischen Daten sind z.T. geschätzt. Tatsächliche Werte können
ggf. abweichen.