Tato položka je již prodána.
HOMAG FPR 525 /6/25/PW
Výrobce | HOMAG |
Model | FPR 525 /6/25/PW |
Druh stroje | stroj na podélné profilování parket |
Rok výroby | 2015 |
Číslo položky | 70956 |
Location | DE, 01665 Klipphausen |
Dokumenty |
Délka obrobku max. | 2.500 mm |
Délka obrobku min. | 600 mm |
Šířka obrobku max. | 400 mm |
Šířka obrobku min. | 65 mm |
Tloušťka obrobku max. | 25 mm |
Tloušťka obrobku min. | 4 mm |
stanice pro podélné obrábění | 1 |
Posuv max. | 80 m/min |
Posuv plynulý | |
Spoj na klik | |
Dvoustranná čepovačka | |
HOMAG Magnetic Chain System (MCS) | |
HOMAG Chain conveyor ventilation | |
HOMAG ecoPlus | |
Řízení | Homag powerTouch, powerControl PC 22 |
Software | woodCommander |
Hmotnost | 12.750 kg |
Označení CE |
* Die Maschine war zum einseitigen Klick-Profil-Fräsen von
Bodenplatten für Fahrzeuge im Einsatz.
* manuelles Beschicken und Abstapeln bzw. Teilerückführung mittels
obenliegender Rollenbahn
* wechselseitige Beschickung möglich (je nachdem ob Nut oder Feder
benötigt wird)
* Doppeloberdruck ermöglicht die einseitige Bearbeitung von
Schmalteilen mit einer Mindedestbreite von 65 mm. Wird die Maschine
als Doppelendprofilierer genutzt sind folgende minimale Arbeitsbreiten
möglich:
** 138 mm bei einer Profiltiefe von 7 mm
** 145 mm bei einer Profiltiefe von 12 mm
* Aggregatekonfiguration:
1.) Freiplatz mit vorinstallierter Elektrik für Formatteilaggregat
2.) Fräsaggregat 4,5 kW, 6.000 U/min, für hydrogespannte Werkzeuge,
Motor neigbar
3.) Freiplatz mit vorinstallierter Elektrik für Formatteilaggregat
4.) Freiplatz mit vorinstallierter Elektrik für Formatteilaggregat
5.) Freiplatz mit vorinstallierter Elektrik für Formatteilaggregat
* Die auf den Fotos zu sehenden Profilfräser gehören aus Lizenzgründen
NICHT zum Lieferumfang.
=== English ===
* The machine was in use for the one-sided profiling of floor panels
in vehicles.
* manuel feeding and stacking respective workpiece returnation via top
roller track
* manual alternating feeding is possible (according to the need for
groove or tongue workpieces)
* The double top pressure allows the working of narrow pieces down to
65 mm workpiece width. If the machine is used as double end profiler
the minimum working widths are as following:
** min 138 mm for cutting 7 mm deep profiles
** min 145 mm for cutting 12 mm deep profiles
* configuration of working units:
1st) free space with preinstalled electric for a formatting unit
2nd) milling unit 4.5 kW, 6,000 rpm, for hydro-locked tools, motor
inclinable
3rd) free space with preinstalled electric for a formatting unit
4th) free space with preinstalled electric for a formatting unit
5th) free space with preinstalled electric for a formatting unit
* The profile millers which are visible on some photos do not come
with the machine due to licence limitations.