MB MASCHINENBAU ROBA TECH 1300 DI
Výrobce | MB MASCHINENBAU |
Model | ROBA TECH 1300 DI |
Druh stroje | Stroj na mezioperační broušení ploch |
Rok výroby | 2012 |
Číslo položky | 82617 |
Location | na pobočce |
Dostupnost | short-term |
připravenost k provozu | funkčně připraven/ připraven k předvedení |
Dokumenty |
Šířka prostupu | 1.300 mm |
Brusné agregáty | 2 |
Výška prostupu | 80 mm |
Agregáty nahoře | 2 |
stanice pro podélné obrábění | 1 |
stanice s talířovými kartáči | 1 |
Hlavní motor | 5,5 kW |
Posuv max. | 12 m/min |
Posuv plynulý | |
Agregáty oscilující | |
Reversion of rotation | Ano |
Vakuový stůl | |
Uspořádání brusných agregátu | 1x belt, 1x disc |
Označení CE | |
Celkové zapojení | 16 kW |
Space required Length | 3.860 mm |
Space required Width | 2.400 mm |
Space required Height | 2.000 mm |
* sanding units, plc controlled:
1st unit: brush belt; The folowing listed axes can be switched to.
* axis 1a: 360°-rotation of the whole unit, rotation direction free
selectable
* axis 1b: oscillation, which means that instead of a complete
rotation the unit turns in a free selectable angle between 5°...45°
for- and backward.
* axis 2: lengthway movement of the brushes at the brush belt
according to the movement of a sanding belt
2nd unit: planetary disk sanding unit
* 12 sanding disks which are allotted on 3 rotating discs
* Each disc tool has supports for 14 changeable 80 mm segment brushes.
* motor power of each disc tool drive 0,75 kW
* The following listed axes can be switched to in all imaginable
combinations.
** axis 1: The sanding discs rotate.
** axis 2: The rotating discs rotate.
** axis 3: The whole unit with the three rotationg discs oscillates.