SCM RECORD

Záznam uvidíte za

Production series of CNC-machining centres of the Italian manufacturer SCM in the method of construction cantilever machine.

The RECORD-machines are the successors of the first two cnc-machining centres ROUTOMAT and ROUTRON (smaller) and were built in different types over a period of several decades.

Following overall view shows the most important types in their chronological order. The replacement of the individual types took place during interim periods, that is to say, predecessor and successor type existed parallel to each other for some time.

RECORD 1 and 2

The RECORD 1 and 2 were the first types of the RECORD-production series and were equipped with aluminium-matrix tables. Light barriers were responsible for the safety of the operator.

Production period appr. 1995 up to 1997.

RECORD 1

  • Size of working table: 2.135 mm x 800 mm
  • Working range z-axis: 250 mm
  • Tool changer with 7 slots
  • 1 Router head
  • Important options:
  • Torque support of the router head for the use of angle gears
  • VECTOR-axis of the router head
  • Control: NUM 720
  • Successor type: RECORD 120

RECORD 2

  • Size of working table: 3.200 mm x 1.050 mm
  • Working range z-axis: 300 mm
  • Tool changer with 10 slots
  • 1 Router head
  • Important options:
  • Torque support of the router head for the use of angle gears
  • VECTOR-axis of the router head
  • Control: NUM 750
  • Successor type: RECORD 220

RECORD 220

The machines of the type RECORD 220 were equipped with aluminium-matrix table or pod and rail table TVS (Tubeless Vaccum System). Bumper on the aggregates support protected the operator in the case of a collision.

Standard fittings

  • Working range of the router head: 3.180 mm x 1.250 mm
  • Maximum height of the workpiece: 320 mm
  • Tool changer with 10 slots
  • 1 Router head
  • 1 Horizontal UNIVERSAL-aggregate up to 5,5 kW for milling, sawing
  • Chip conveyor in the machine frame

Important options

  • VECTOR-axis
  • TILTING-axis
  • Rotation of the UNIVERSAL-aggregate: 0° or 90° pneumatical, 0° or 180° electrical, interpolating axis 0° up to 270°
  • AUTOSET for TVS-pod and rail table: The vacuum clampings lock automatically on reaching the correct position on the console.
  • Controls: NUM 1060, NUM 1040, NUM 1020

Type abbreviations

P Parallel mounting for the equipment of the aggregate support with up to 2 milling aggregates
TVS Tubeless Vaccum System: pod and rail table with tubeless connection of the suction cups

Production period:

  • Appr. 1997 up to 2001
  • Successor types:
  • RECORD 130
  • RECORD 140, 142
  • RECORD 240

RECORD 120s, 130s, 140s

These types differ with regard to the working range (maximum size of workpiece for the outer profiling).

RECORD 120 X = 2.635 mm; Y = 915 mm; Z = 250 mm
RECORD 120 S X = 2.660 mm; Y = 1.035 mm; Z = 250 mm
RECORD 121 X = 2.600 mm; Y = 1.600 mm; Z = 250 mm
RECORD 122 NWT X = xxx; Y = xxx; Z = xxx
RECORD 125 X = 3.050 mm; Y = 1.297 mm; Z = 310 mm
RECORD 125 N X = 3.050 mm; Y = 1.587 mm; Z = 310 mm
RECORD 130 X = 3.120/4.080 mm; Y = 1.200 mm; Z = 280 mm
RECORD 130 TV X = 2.930/3.830; Y = 1.245 mm
RECORD 132 X = 3.050...5.930 mm; Y = 1.297 mm; Z = 310 mm
RECORD 132 TVN X = 3.000...5.900; Y = 1.280 mm; Z = 268 mm
RECORD 142 X = 3.050...5.930; Y = 1.297 mm; Z = 280 mm
RECORD 142 TVN X = 2.860...5.760 mm; Y = 1.280 mm; Z = 280 mm

Importance of the type abbreviations

NWT Next Windows Technology
TV Tubeless Vacuum - standard-pod and rail table, in former models with slim traverses, later mass-produced with wide traverses
TVN Pod and rail table with wide traverses; later SCM changed standard over to wide traverses and the term TVN was dropped Further differences can be find in the equipment. The following overall view contains standard fittings as well as optional equipment.

RECORD 120s

All machines were equipped with a tool changer and could be ordered with VECTOR-axis. They were built as starter machines resp. as second machines for bigger companies. The optional feature NWT was equipped standard for the production of windows and doors, amongst others with a 11 kW milling motor instead of the standard motor of 7,5 kW.

RECORD 120 Matrix table, 5 vertical and 4 horizontal boring spindles, user interface to the control is an integrated PC
RECORD 120 NWT Pod and rail table with window scantling-clamping system, wood chips conveyor belt, user interface is an integrated PC
RECORD 122 NWT Reworked 120 NWT with the possibility to use additional tool magazines behind the machine (tool Room)
RECORD 120 S Matrix table, 5 vertical and 4 horizontal boring spindles, user interface is an integrated PC
RECORD 121 Matrix table, 5 vertical and 4 horizontal boring spindles, tiltable grooving aggregate, horizontal milling aggregate Universal K, user interface is a PC
RECORD 125 Matrix table, 9 or 18 vertical and 6 horizontal boring spindles, user interface is a PC

RECORD 130s and 140s

Especially these machines were designed for solid wood processing, the TV- and TVN-models specially for the windows- and staircase construction. All models could be equipped with Vector-axis. The user interface to the machine-PLC was a PC. During the production period of the RECORD 130 and 140 the switch-over of the safety device from bumper to shut-off mats took place. Temporarily the machines were equipped with both safety devices at the same time.

RECORD 130 Matrix table, 2 moulding aggregates, 9 or 18 vertical and 6 horizontal boring spindles, saw aggregate fixed or swivelling 0° and 90° or numerical-controlled 360°, 1 horizontal milling aggregate Universal K
RECORD 130 TV Pod and rail table with wood chips conveyor belt, otherwise like RECORD 130
RECORD 132 Matrix table with SCM MPS, 1 up to 2 moulding aggregates, saw aggregate, 1 horizontal milling aggregate M or K2, 9 up to 26 vertical and up to 10 horizontal boring spindles, tool changer Rapid 12 or 24 and SCM TRM with altogether up to 24 tool changing positions
RECORD 132 TV Pod and rail table, otherwise like RECORD 132
RECORD 132 TVN Pod and rail table, otherwise like RECORD 132
RECORD 142 Like RECORD 132 but freely stocked, matrix table with MPS- system, 2 moulding aggregates each with one ride-tool changer with altogether up to 36 tool changing positions, 1 horizontal milling aggregate M or K2
RECORD 142 TVN Pod and rail table, otherwise like RECORD 142
RECORD 132 NT TVN Prisma Like RECORD 132 TVN but with 5-axes-milling aggregate (Prisma)
RECORD 142 TVN Prisma Like RECORD 142 TVN but with 5-axes-milling aggregate Prisma

Production period

RECORD 120 Appr. 1997 up to 2000
RECORD 125 Appr. 2002 up to 2005
RECORD 130 Appr. 2000 up to 2005
RECORD 132 Appr. 2000 up to 2012
RECORD 140 200x up to 2010
RECORD 142 200x up to 2010

RECORD 240 and 250

The RECORD 240 was in its time the flagship of the CNC-machining centres from SCM and could be equipped with a large number of processing aggregates and accessories. Both matrix table and TV-pod and rail table were available. The user interface to the machine-PLC consisted of an into the electrical cabinet integrated PC.

  • Tool changing system SCM Rapid
  • Additional tool magazine TOOL ROOM with up to 48 tool changing positions
  • VECTOR-axis for moulding aggregates
  • CN-control for saw aggregates
  • Aggregates of technical type 1:
  • Boring aggregate F 26 with 14 vertical and 12 horizontal boring spindles
  • 1 Milling aggregate
  • Aggregates of technical type 2:
  • Boring aggregate F 18 with 12 vertical and 6 horizontal boring spindles
  • 1 Milling aggregate
  • 1 Saw aggregate, swivelling between X and Y
  • Aggregates of technical type 3:
  • Boring aggregate F 18 with 12 vertical and 6 horizontal boring spindles
  • 1 Milling aggregate
  • 1 Saw aggregate, swivelling between X and Y
  • 1 Horizontal milling aggregate Universal K2 with 2 spindles
  • Aggregates of technical type 4:
  • Boring aggregate F9 with 5 vertical and 4 horizontal boring spindles
  • 2 Moulding aggregates
  • 1 Saw aggregate, swivelling between X and Y
  • 1 Horizontal milling aggregate 'Universal K1' with 1 spindle

The RECORD 250 compared to the RECORD 240 was equipped with a greatly extended Y-axis of 1.920 mm and with that touched the stability limit of cantilever machines.

Later the RECORD 240 was offered as technical type NT with different aggregate configurations:

MODULO Available aggregates: milling aggregate with Vector-axis, drilling aggregates F with 11, 28 or 26 vertical and horizontal boring spindles, independent saw aggregate with or without rotational axis, horizontal milling aggregate 'Universal K2', additional milling aggregate with own, ride-tool changer, horizontal milling aggregate Universal m² with rotational axis
PRISMA 5-axis-milling aggregate with TTS-system, without more processing aggregates
TECNO 2 Moulding aggregates with own tool changers and several additional aggregates

Working ranges

RECORD 240 Matrix table: X = 3.680/4.640/5.720/6.680 mm; Y = 1.200/1.560 mm; Z-traversing range = 340 mm
RECORD 240 TVN Pod and rail table: X = 3.680/4.640/5.720/6.680 mm; Y =

1.200/1.560 mm; Z-traversing range = 340 mm

RECORD 250 Matrix table: X = 3.680/4.640/5.720/6.680 mm; Y = 1.920 mm; Z-traversing range = 340 mm

Production period

Appr. 2001 up to 2009

RECORD 100, 110 and 210

Production period

RECORD 100, 110 Appr. 2002 up to 2012
RECORD 210 Appr. 2007 up to 2008

Equipment

In the year 2002, therefore still during the production period of the RECORD 240 and 250, SCM introduced the two-part equipment system, consisting of the type abbreviations AL and NT.

AL ActionLine: kind of aggregates to a great extent determinated
NT Kind of aggregates freely according to customer

The AL- as well as the NT-machines were available with 5-axis-milling aggregate 'PRISMA'. Machines of this kind have the term PRISMA in their description. The differences between the types 100 AL, 110 AL and 210 AL are mainly in the size of the working range and in the given aggregates:

100 AL Boring aggregate with 7 vertical and 4 horizontal boring spindles and integrated saw, 1 milling aggregate with Vector-axis
110 AL Boring aggregate with 12 vertical and 6 horizontal boring spindles and integrated saw, 1 milling aggregate with Vector-axis
210 AL Boring aggregate with 12 vertical and 6 horizontal boring spindles and integrated saw, 1 milling aggregate with Vector-axis
210 AL XL Like 210 AL but with extended working range

Obrázky a videa

RECORD 120
SCM, 1998
Video
CNC-Bearbeitungszentrum RECORD 1
SCM
CNC-Bearbeitungszentrum RECORD 2
SCM
CNC-Bearbeitungszentrum RECORD 220
SCM
CNC-Bearbeitungszentrum RECORD 120
SCM
RECORD 120 NWT für den Fensterbau
SCM
CNC-Bearbeitungszentrum RECORD 120 S
SCM
RECORD 120 S nach der Farbumstellung 1999
SCM
CNC-Bearbeitungszentrum RECORD 121
SCM
RECORD 122 NWT für den Fensterbau
SCM
CNC-Bearbeitungszentrum RECORD 125
SCM
CNC-Bearbeitungszentrum RECORD 130
SCM
Record 132
SCM, 2002
Record 132TVN
SCM, 2002
CNC-Bearbeitungszentrum RECORD 132 NT TVN
SCM
Record 142
SCM, 2002
CNC-Bearbeitungszentrum RECORD 240 TVN
SCM
RECORD 240 NT TVN
SCM, 2010
CNC-Bearbeitungszentrum RECORD 250
SCM, 2003
Record 100
SCM, 2002
Record 100AL
SCM, 2005
Record 100NTTVN
SCM, 2012
Record 110AL Prisma
SCM, 2008
Record 110NT
SCM, 2006
CNC-Bearbeitungszentrum RECORD 210 AL
SCM, 2005

Typ