IMA BIMA 410/V + Schugoma Kantenking Hot-Air
CNC machining centre with edgebanding
Former showroom machine: zero-joint edgebanding with Schugoma Hot-Air KantenKing
Article details
| Manufacturer | IMA |
| Model | BIMA 410/V + Schugoma Kantenking Hot-Air |
| Machine type | CNC machining centre with edgebanding |
| Year of manufacture | 2000 |
| Article number | 68832 |
| Location | DE, 01665 Klipphausen |
| Documents |
Technical specifications
Working dimension X | 3.000 mm |
Working dimension Y | 1.200 mm |
Working dimension Z | 100 mm |
Number of milling spindles | 1 |
Main motor power | 12 kW |
Rotation speed max | 18.000 rpm |
Torque support | |
4th axis | C-axis |
Tool clamping system | HSK-F63 |
Tool changer positions | 18 |
Vertical drilling spindles | 5 |
Horizontal drilling spindles in X | 2 |
Horizontal drilling spindles in Y | 2 |
Groove saw | Unit, changeable |
Edgebanding aggregate | Hot air, Seperate Y-axis |
Edgeband height max | 44 mm |
Places in coil magazine | 2 |
Cantilever machine | |
Machine table | Pod and rail table |
Number of consoles | 6 |
Vacuum pump | |
Capacity vacuum pump | 80 m³/h |
Workpiece probing | |
Interface for .dxf data | |
Safety device | Safety mat |
Handheld terminal | |
Workpiece support aids | |
Milling spindle liquid-cooled | |
Control | IMA IMATRONIC NT 231 |
Software | IMA IMAWOP 3.0 |
Weight | 8.325 kg |
CE marking | |
Total connection | 33 kW |
Space required Length | 8.500 mm |
Space required Width | 5.000 mm |
Space required Height | 3.100 mm |
Components of this machine
CNC machining centre with edgebanding
IMA BIMA 410/V + Schugoma Kantenking Hot-Air
# 68832
This machine consists of further components which may not be available individually. Please contact us!
Additional Information
* 2015 Overhaul and equipment with a zero-joint
edge banding unit from Schugoma.
* Since then only a few operating hours
* 3 interchangeable units included:
- Flush/chamfer
- profile-, flat scraper
- 4-fold horizontal drilling (this refers to drill hor. X,Y)
* Cross-cut saw unit permanently installed on the machine body
* Workpiece scanning by means of measuring probe