This item is not available anymore.
WEINIG PROFIMAT 23
Moulder
Technical specifications
Working width | 230 mm |
Planing height | 120 mm |
Number of spindles | 6 |
Bottom spindles | 2 |
Right spindles | 1 |
Spindles left | 1 |
Spindles top | 1 |
Spindle configuration | b-r-l-t-b-gl |
Spindle rotation speed max 1/min | 6.000 rpm |
Spindle diameter | 40 mm |
Main motor power | 7,5 kW |
Cutting glazing beads | |
Seperate motor per spindle | |
Motoric adjustment | Planing height, Planing width |
Infeed table length | 2.000 mm |
Lubrication pump | Yes |
Pneumatic top pressure | |
Feedrate max | 24 m/min |
Continuously variable feed | |
Feed motor | 3 kW |
Type of feed roller drive | Cardanic |
Lifting spindle | pneumatically controlled |
WEINIG ATS | |
CE marking | |
Total connection | 27 kW |
Additional Information
Baujahr geschätzt/ year of manufacture estimated
* rechte Spindel axial pneumatisch getaktet
- right spindle axial pneumatically controlled
Some information was estimated due to a lack of available data, transferred from brochures or taken from third parties without verification.
