This item is not available anymore.
Similar positions from our current offer
Feed-through veneer press ORMA
ORMA PCC L 35/13
Feed-through veneer press OMC F /A CA 33/17
NUOVA CMB PFR -CCL 55x16
39.000,- € - 49.000,- €
Feed-through veneer press PAOLETTI SP 3000x900
SCM SERGIANI MVC 25-30/5 + OSAMA S4R-1300
Feed-through veneer press KUPER
SERGIANI LAS 230 -BM
49.000,- € - 69.000,- €
ITALPRESSE MARK C Linie
BÜRKLE ODW 2732 /60
50.000,- € - 90.000,- €
FRIZ PD 6-11/22/6
ORMA LCC 30/26 AF NPA
Feed-through veneer press
Article details
| Manufacturer | ORMA |
| Model | LCC 30/26 AF NPA |
| Machine type | Feed-through veneer press |
| Year of manufacture | 2006 |
| Article number | 79710 |
| Operating status | not connected |
| Documents |
Technical specifications
Panel length | 3.000 mm |
Panel width | 2.600 mm |
Total pressure | 330 t |
Number of cylinders | 4 |
Daylight opening | 150 mm |
Total pressure t | 5,3 kg/cm² |
Number of daylights | 1 |
Infeed belt conveyor | |
Programmable controller | |
Glue application | |
Automatic loading station | |
Heating plates | Thermo oil |
Material of the platen | steel |
Feeding | transversal |
Mylar-film | |
Parallel guidance by toothed rack | |
CE marking |
Additional Information
Linie bestehend aus:
* Hubtisch, 3 t, 2 x 1 m
* Bürstmaschine (oben/unten), 1300 mm
* Leimauftragsmaschine (4 Rollen), 1300 mm
* automatische Positioniervorrichtung
* Beschickung
* Presse LCC 30/26
* Entladung
=== English ===
Line consisting of:
* Lifting table, 3 t, 2 x 1 m
* Brushing machine (top/bottom), 1300 mm
* Glue spreader (4 rollers), 1300 mm
* automatic positioning device
* Feeding
* Press LCC 30/26
* Unloading