This item is not available anymore.
OMMA PRO-J 2100
Laminating machine
to applicate protection foil
Article details
Manufacturer | OMMA |
Model | PRO -J 2100 |
Machine type | Laminating machine |
Year of manufacture | 2019 |
Article number | 80884 |
Location | ex location |
Operating status | dismantled / stored |
Documents |
Technical specifications
Workpiece width max | 2.000 mm |
Workpiece thickness max | 55 mm |
Main motor power | 2 kW |
Feedrate max | 25 m/min |
Continuously variable feed | |
Technical principle | cold laminating |
Processing | double-sided |
Pressure | rubber-coated roller |
Glue system | self-adhesive foil |
Foil cutting device | automatic |
Control | SIEMENS SIMATIC S7 |
Total connection | 2 kW |
Additional Information
* For the lamination of flat surfaces with protection film, e.g. high-
gloss furniture panels - but plastic or metal panels as well
* Minimum workpiece thicknesses from 0,6-0,7 mm (only stiff material)
* Double-sided as well as single-sided lamination on each side
possible