MB MASCHINENBAU ROBA TECH 1300 DI
Manufacturer | MB MASCHINENBAU |
Model | ROBA TECH 1300 DI |
Machine type | Denibbing sander for surfaces |
Year of manufacture | 2012 |
Article number | 82617 |
Location | ex location |
Availability | short-term |
Operating status | ready for operation / demonstration possible |
Documents |
Opening width | 1.300 mm |
Sanding aggregates | 2 |
Passage height max | 80 mm |
Aggregates top | 2 |
Aggregates for lengthwise processing | 1 |
Units with disc brushes | 1 |
Main motor power | 5,5 kW |
Feedrate max | 12 m/min |
Continuously variable feed | |
Aggregates oscillating | |
Reversion of rotation | Yes |
Vacuum table | |
Sanding aggregate configuration | 1x belt, 1x disc |
CE marking | |
Total connection | 16 kW |
Space required | |
Length | 3.860 mm |
Width | 2.400 mm |
Height | 2.000 mm |
* sanding units, plc controlled:
1st unit: brush belt; The folowing listed axes can be switched to.
* axis 1a: 360°-rotation of the whole unit, rotation direction free
selectable
* axis 1b: oscillation, which means that instead of a complete
rotation the unit turns in a free selectable angle between 5°...45°
for- and backward.
* axis 2: lengthway movement of the brushes at the brush belt
according to the movement of a sanding belt
2nd unit: planetary disk sanding unit
* 12 sanding disks which are allotted on 3 rotating discs
* Each disc tool has supports for 14 changeable 80 mm segment brushes.
* motor power of each disc tool drive 0,75 kW
* The following listed axes can be switched to in all imaginable
combinations.
** axis 1: The sanding discs rotate.
** axis 2: The rotating discs rotate.
** axis 3: The whole unit with the three rotationg discs oscillates.