L'article n'est désormais plus disponible.
HEMPEL ERH 25
Fabricant | HEMPEL |
Modèle | ERH 25 |
Sous-catégorie de machines | Tour à coques et à décolleter |
Année de construction | 1993 |
N° d'article | 76512 |
État de fonctionnement | toujours branché(e) |
diamètre maximal du tour en | 250 mm |
capacité pièces/8h | 6.400 |
épaisseur maximale de la pièce; | 70 mm |
supports de reproduction du côté frontal | 1 |
alimentation à partir du magasin | |
Capable de tourner des encoches de circonférence | |
avancement | hydraulique |
produit | cercles et anneaux |
* Ringdrehautomat in Bestaustattung:
** Rohteile aus dem Magazin werden automatisch für das Spannen gebohrt
** automatische Übergabe der Rohteile von der Bohrstation zum Drehen
** automatisches Spannen und Drehen
** Bearbeitung der Werkstücke von hinten und vorn
** einsatzgesteuerter Messersupport von oben zum Einbringen
umlaufender Rillen
* Baujahr und Daten geschätzt
===English===
* ring turning lathe in top configuration:
** raw pieces from the hopper feeder are drilled automatically for
clamping
** automatic transfer from the drilling station to the turning station
** automatic clamping and turning
** two-sided working of the pieces from the back and the front
** plunge-in controlled tool support from above to insert circumsizing
grooves
* year of manufacture and givens estimated