MB MASCHINENBAU ROBA TECH 1300 DI
Fabricant | MB MASCHINENBAU |
Modèle | ROBA TECH 1300 DI |
Sous-catégorie de machines | Machine de ponçage intermédiaire pour surfaces |
Année de construction | 2012 |
N° d'article | 82617 |
Endroit | ex emplacement |
Disponibilité | court-terme |
État de fonctionnement | prêt(e) à fonctionner/démonstration possible |
Documents |
largeur de passage en | 1.300 mm |
groupes de ponçage | 2 |
hauteur de passage en | 80 mm |
groupes en haut | 2 |
stations d'usinage longitudinales | 1 |
stations avec brosses (circulaires) | 1 |
puissance du moteur principal en | 5,5 kW |
avancement maximal en | 12 m/min |
avance réglable sans paliers | |
groupes oscillants | |
inversion du sens de rotation | Oui |
table de serrage à vide | |
Disposition des groupes de meulage | 1x chenille, 1x disque |
marque CE | |
raccord global en | 16 kW |
Espace requis - longueur | 3.860 mm |
Espace requis - largeur | 2.400 mm |
Espace requis - hauteur | 2.000 mm |
* sanding units, plc controlled:
1st unit: brush belt; The folowing listed axes can be switched to.
* axis 1a: 360°-rotation of the whole unit, rotation direction free
selectable
* axis 1b: oscillation, which means that instead of a complete
rotation the unit turns in a free selectable angle between 5°...45°
for- and backward.
* axis 2: lengthway movement of the brushes at the brush belt
according to the movement of a sanding belt
2nd unit: planetary disk sanding unit
* 12 sanding disks which are allotted on 3 rotating discs
* Each disc tool has supports for 14 changeable 80 mm segment brushes.
* motor power of each disc tool drive 0,75 kW
* The following listed axes can be switched to in all imaginable
combinations.
** axis 1: The sanding discs rotate.
** axis 2: The rotating discs rotate.
** axis 3: The whole unit with the three rotationg discs oscillates.