icon

Questo articolo è già venduto.

HOMAG FPR 525 /6/25/PW

profilatrice per parquet
Versione stampabile
Articoli
FabbricanteHOMAG
ModelloFPR 525 /6/25/PW
Sottocategoria di macchineprofilatrice per parquet
Anno2015
Cod. art.70956
LuogoDE, 01665 Klipphausen
Documenti
Dati tecnici
Lunghezza pezzo max.
2.500 mm
Lunghezza pezzo min.
600 mm
Larghezza pezzo max.
400 mm
Larghezza pezzo min.
65 mm
spessore pezzo max
25 mm
spessore pezzo min
4 mm
stazioni di lavorazione longitudinale
1
Velocitá avanzamento max
80 m/min
Avanzamento regolabile
Giunzione click
Squadratrice tenonatrice doppia
HOMAG Magnetic Chain System (MCS)
HOMAG Ventilazione del binario della catena
HOMAG ecoPlus
Controllo
Homag powerTouch, powerControl PC 22
Software
woodCommander
Peso ca.
12.750 kg
Certificazione CE
ulteriori informazioni

* Die Maschine war zum einseitigen Klick-Profil-Fräsen von
Bodenplatten für Fahrzeuge im Einsatz.
* manuelles Beschicken und Abstapeln bzw. Teilerückführung mittels
obenliegender Rollenbahn
* wechselseitige Beschickung möglich (je nachdem ob Nut oder Feder
benötigt wird)
* Doppeloberdruck ermöglicht die einseitige Bearbeitung von
Schmalteilen mit einer Mindedestbreite von 65 mm. Wird die Maschine
als Doppelendprofilierer genutzt sind folgende minimale Arbeitsbreiten
möglich:
** 138 mm bei einer Profiltiefe von 7 mm
** 145 mm bei einer Profiltiefe von 12 mm
* Aggregatekonfiguration:
1.) Freiplatz mit vorinstallierter Elektrik für Formatteilaggregat
2.) Fräsaggregat 4,5 kW, 6.000 U/min, für hydrogespannte Werkzeuge,
Motor neigbar
3.) Freiplatz mit vorinstallierter Elektrik für Formatteilaggregat
4.) Freiplatz mit vorinstallierter Elektrik für Formatteilaggregat
5.) Freiplatz mit vorinstallierter Elektrik für Formatteilaggregat
* Die auf den Fotos zu sehenden Profilfräser gehören aus Lizenzgründen
NICHT zum Lieferumfang.

=== English ===
* The machine was in use for the one-sided profiling of floor panels
in vehicles.
* manuel feeding and stacking respective workpiece returnation via top
roller track
* manual alternating feeding is possible (according to the need for
groove or tongue workpieces)
* The double top pressure allows the working of narrow pieces down to
65 mm workpiece width. If the machine is used as double end profiler
the minimum working widths are as following:
** min 138 mm for cutting 7 mm deep profiles
** min 145 mm for cutting 12 mm deep profiles
* configuration of working units:
1st) free space with preinstalled electric for a formatting unit
2nd) milling unit 4.5 kW, 6,000 rpm, for hydro-locked tools, motor
inclinable
3rd) free space with preinstalled electric for a formatting unit
4th) free space with preinstalled electric for a formatting unit
5th) free space with preinstalled electric for a formatting unit
* The profile millers which are visible on some photos do not come
with the machine due to licence limitations.

Estratto dall'enciclopedia della tecnologia del legno WOOD TEC PEDIA.

Modello

HOMAG FPR 525

Profilatore a doppia estremità per produzione di pavimenti fino a 8 unità di elaborazione catena magnetica brevettata pressione parte superiore regolabile orizzontale Velocità ...
Leggere di più

fonte: HOMAG