icon

Questo articolo non è più disponibile.

HUNDEGGER K 2I

macchina di falegnameria per giunti
Versione stampabile
Margine sui prezzi
Questo articolo non è più disponibile.
Articoli
FabbricanteHUNDEGGER
ModelloK 2I
Sottocategoria di macchinemacchina di falegnameria per giunti
Anno2012
Cod. art.81236
Disponibilità operativaancora in uso in produzione
Documenti
Dati tecnici
Larghezza pezzo max.
1.250 mm
spessore pezzo max
300 mm
Lunghezza pezzo max.
16.000 mm
Aggregati totali
8
Carrello di posizionamento
1
numero di lame
2
aggregati gruppo a forare
3
Numero di aggregati per toupie
3
Motore principale Kw
11 kW
Impianto a 5 assi
Fresa a candela
marchio automatico
Unità di fresatura su 4 lati
Sega per taglio falsi puntoni
Ribaltatore
avanzamento pezzo
pinza di presa
Nastro trasportatore di trucioli
Certificazione CE
Potenza totale
17 kW
ulteriori informazioni

Ausstattung:
- Option K2i-1250 zur Bearbeitung von Teilen 240 x 1250 mm
* flache Bearbeitung. Drehkapazität bleibt jedoch wie bei
Standardmaschinen bei 450 mm
* Standartwerkstück Breite + Länge: 450 x 300 mm
- Werkstücklänge 16 m verladbar. Theoretisch unbegrenzte Länge möglich
- Markier- und Beschriftungssystem
- 4-Achs-Kreissäge
- 5-Achs-Universalfräser (FU5) 11 kW
- Hydraulisches automatisches Drehen
- 2x Vertikal-Hochleistungsbohrer 3.0 kW
- Bohrer 2.2 kW, kippbar von 0 bis 45 °
- vertikaler Fräser 5.5 kW
- Oberfräse 5.0 kW
- Doppelt geführte verstärkte Kettensäge/Schlitzgerät 8/9 x 1250 mm
- Späneförderband
- Mikro-Staubabsaugvorrichtung
- Fünfbeiniger Aufbewahrungstisch
- Zweiwege-Transport- und Positionierungsvorrichtung
- Kombihalter für vertikale Werkzeuge
- Kombihalter für horizontale Werkzeuge
- Einsatz von Edelstahlwalzen statt Chrom
- Verchromte Tische und Einsatz von Teflonplatten

Equipment:
- Option K2i-1250 for machining parts 240 x 1250 mm
* flat machining. Turning capacity remains the same as
with Standard machines at 450 mm
* Standard workpiece width + length: 450 x 300 mm
- Workpiece length 16 m can be loaded. Theoretically unlimited length
possible
- Marking and labeling system
- 4-axis circular saw
- 5-axis universal milling cutter (FU5) 11 kW
- Hydraulic automatic turning
- 2x vertical high-performance drills 3.0 kW
- 2.2 kW drill, tiltable from 0 to 45 °
- vertical milling cutter 5.5 kW
- Top Router 5.0 kW
- Double guided reinforced chainsaw/slot device 8/9 x 1250 mm
- Chip conveyor belt
- Micro dust extraction device
- Five-legged storage table
- Two-way transport and positioning device
- Combination holder for vertical tools
- Combination holder for horizontal tools
- Use of stainless steel rollers instead of chrome
- Chromed tables and use of Teflon plates

Estratto dall'enciclopedia della tecnologia del legno WOOD TEC PEDIA.

Modello

HUNDEGGER K 2I

Macchina per travi flessibile Tagli trasversali continui da 20 x 50 a 300 x 450 mm (opzioni: 650 /1250 mm) costruzione modulare - può essere equipaggiato e ampliato con aggregati aggiuntive ...
Leggere di più

fonte: HUNDEGGER