ПРОДАН!
HOMAG FPR 525 /6/25/PW
Производитель | HOMAG |
Model | FPR 525 /6/25/PW |
Тип станка | Станок для продольного профилирования паркетной доски |
Год выпуска | 2015 |
№ артикула | 70956 |
Местоположение | DE 01665 Klipphausen |
Документы |
Макс. длина заготовки | 2.500 мм |
Мин. длина заготовки | 600 мм |
Макс. ширина детали | 400 мм |
мин.ширина детали | 65 мм |
Макс. толщина детали | 25 мм |
Мин. толщина детали | 4 мм |
Станции для обработки в продольном направлении | 1 |
Макс. Скорость подачи | 80 м/мин. |
Бесступенчатая подача | |
Сборно-разборное соединение (замковое соединение типа Click) | |
Двусторонний шипорезный торцовый станок | |
HOMAG Magnetic Chain System (MCS) | |
HOMAG Вентиляция цепного конвейера | |
HOMAG ecoPlus | |
управление | Homag powerTouch, powerControl PC 22 |
Программное обеспечение | woodCommander |
вес, | 12.750 кг |
CE знак |
* Die Maschine war zum einseitigen Klick-Profil-Fräsen von
Bodenplatten für Fahrzeuge im Einsatz.
* manuelles Beschicken und Abstapeln bzw. Teilerückführung mittels
obenliegender Rollenbahn
* wechselseitige Beschickung möglich (je nachdem ob Nut oder Feder
benötigt wird)
* Doppeloberdruck ermöglicht die einseitige Bearbeitung von
Schmalteilen mit einer Mindedestbreite von 65 mm. Wird die Maschine
als Doppelendprofilierer genutzt sind folgende minimale Arbeitsbreiten
möglich:
** 138 mm bei einer Profiltiefe von 7 mm
** 145 mm bei einer Profiltiefe von 12 mm
* Aggregatekonfiguration:
1.) Freiplatz mit vorinstallierter Elektrik für Formatteilaggregat
2.) Fräsaggregat 4,5 kW, 6.000 U/min, für hydrogespannte Werkzeuge,
Motor neigbar
3.) Freiplatz mit vorinstallierter Elektrik für Formatteilaggregat
4.) Freiplatz mit vorinstallierter Elektrik für Formatteilaggregat
5.) Freiplatz mit vorinstallierter Elektrik für Formatteilaggregat
* Die auf den Fotos zu sehenden Profilfräser gehören aus Lizenzgründen
NICHT zum Lieferumfang.
=== English ===
* The machine was in use for the one-sided profiling of floor panels
in vehicles.
* manuel feeding and stacking respective workpiece returnation via top
roller track
* manual alternating feeding is possible (according to the need for
groove or tongue workpieces)
* The double top pressure allows the working of narrow pieces down to
65 mm workpiece width. If the machine is used as double end profiler
the minimum working widths are as following:
** min 138 mm for cutting 7 mm deep profiles
** min 145 mm for cutting 12 mm deep profiles
* configuration of working units:
1st) free space with preinstalled electric for a formatting unit
2nd) milling unit 4.5 kW, 6,000 rpm, for hydro-locked tools, motor
inclinable
3rd) free space with preinstalled electric for a formatting unit
4th) free space with preinstalled electric for a formatting unit
5th) free space with preinstalled electric for a formatting unit
* The profile millers which are visible on some photos do not come
with the machine due to licence limitations.