This item is already sold.
SCM SANDYA 7 S
Širokotračna brusilica
Cena
This item is already sold.
Video
Article details
Proizvodjač | SCM |
Model | SANDYA 7 S |
Machine type | Širokotračna brusilica |
Godina proizvodnje | 2004 |
Broj artikla | 71248 |
Location | DE, 01665 Klipphausen |
Operating status | demonstration possible |
Documents |
Tehnička specifikacija
Sanding width | 1.350 mm |
Workpiece thickness min | 4 mm |
Passage height max | 170 mm |
Sanding aggregates total | 2 |
Sanding rollers | 1 |
Steel roller | |
Hardness grade of roller in ° shore | 40 |
Combination unit | 1 |
Sanding pads total | 1 |
Segmental pressure pad | elastic pad |
Sensing of workpiece thickness | mechanical |
Main motor power | 22 kW |
Sanding belt length | 2.150 mm |
Belt speed max | 18 m/s |
Feedrate max | 18 m/min |
Continuously variable feed | |
Configuration of aggregates | r-c |
Side of belt change | Left |
SCM Elastic segmented pad | |
Control | SCM LOGIC 50 |
Weight | 2.130 kg |
CE marking | |
Declaration of CE-conformity | |
Space required Length | 3.000 mm |
Space required Width | 3.500 mm |
Space required Height | 2.450 mm |
Additional Information
Diese Maschine stammt von einem österreichischen Zimmerei-Betrieb und
wurde durch eine Neumaschinen-Anschaffung frei. Die Gummiwalze des
zweiten Aggregats ist nicht in gutem Zustand und sollte ggf. neu
vulkanisiert werden.
* Stahlwalze / Gummiwalze 40°Shore - Schleifschuh / 1 Antriebsmotor 22
KW
=== English ===
We purchased this machine from an Austrian carpentry and it became
available due to the purchase of a new machine. The rubber roller of
the second aggregate is not in good condition and should be newly
vulcanized if necessary.
* steel roller / rubber roller 40° shore - sanding shoe / 1 drive
motor 22 KW