HUNDEGGER ROBOT DRIVE 1250
Fabricant | HUNDEGGER |
Modèle | ROBOT DRIVE 1250 |
Sous-catégorie de machines | Centre d'usinage de charpente |
Année de construction | 2018 |
N° d'article | 19934 |
Endroit | ex emplacement |
Disponibilité | A partir d'environ Décembre 2024 |
État de fonctionnement | encore utilisé(e) dans la production |
Documents |
largeur maximale de la pièce | 1.300 mm |
épaisseur maximale de la pièce; | 300 mm |
longueur maximale de la pièce | 13.000 mm |
hauteur de découpe pour la mise à longueur en | 300 mm |
total des agrégats | 4 |
nombre de groupes de scie | 2 |
groupes de forage | 2 |
nombre de groupes de fraisage | 1 |
postes de changement d'outils | 18 |
mortaiseuses | 1 |
puissance du moteur principal en | 29 kW |
Technique à 5 axes | |
fraise crayon | |
étiquetage automatique | |
scie pour découpes du type Shifter | |
Laser à lignes | |
Avance à rouleaux | |
HSK-E63 | |
Logiciel | HUNDEGGER CAMBIUM |
Features:
* automatic infeed with 7-strand cross-buffer-mechanisation
* hydraulic lifting table for the picking-up of workpieces untill a weight of 5 tons
* 1 6-axis ROBOT unit with tool clamping system HSK E63 and 16-fold toolchanger; Workings with sawing blade and diverse milling tools as well as the execution of slots wit the chain slotting unit can be done with it.
* 1 seperate tool position for the chain slot milling unit including the slot milling unit
* 1 seperate tool position for sawing blades with big diameter
* 2 horizontal drilling units
* 1 5-axis sawing unit from above with flangeless sawing blade for the execution of cuts and slots in all planes and angles including a marking device working on three sides of the workpiece
* outfeed area with 6-strand transfer-cross-conveyor